13
Loading Paper
You can load a variety of paper types in your printer, as described in these sections:
■
“Loading Paper in the Sheet Feeder” below
■
“Loading Envelopes” on page 15
■
“Loading Roll Paper” on page 16
For instructions on loading CDs or DVDs using the CD/DVD tray, see page 63.
Loading Paper in the Sheet Feeder
1. Make sure the output tray is in the lower position. If it isn’t, place one hand on
the top of the printer, lift the tray, and ease it down into the lower position.
2. Open the paper support and pull up the support extension.
3. Pull out the output tray extensions.
4. Place your paper in the printer and slide it
against the right side of the sheet feeder.
5. Adjust the left edge guide to fit lightly
against the paper.
Also follow the loading guidelines on the next
page.
Paper
support
Output tray