7. COMMAND
46
EPSON
S1D15722D01B000 Technical Manual (Rev.1.1)
7.3 Example of Setting Instructions (Reference Example)
(1) Initial
setting
Numbers in parentheses correspond to those in the item of command description.
Stability of power supply
*
1
V
DD
, V
DD2
power supply ON in the state of
____
RES Pin =LOW
Setting functions by command input (user-configuration)
*
3
(2) Display
normal/inverted
(3)
Full display lighting ON/OFF
(4)
Select common output state
(5)
Set display start line
(11) Direction of setting column address
(14) Set
display
mode
(17) Set
number
of
display
lines
(26) Select
MLS
drive
The state of reset cancelled.
____
RES pin = HIGH
*
2
End of initial setting
Setting functions by command input (user-configuration)
(12) Set n line inverted drive register
(13) n line inverted drive ON/FF
Setting functions by command input (user-configuration)
*
3
(21) Select clock frequency
(20) Built-in oscillation circuit ON/OFF
(25) Temperature
seosor
ON/OFF
(26) TEST1
set
<When external clock using,>
Input clock to CL pin
Supply LCD voltages externally
*
4
