Chapter 3 Installation and Configuration
8
EPSON
S5U13L02P00C100 Evaluation Board User Manual (Rev. 1.0)
3.2 Configuration Jumpers
The S5U13L02P00C100 Evaluation Board has 2-pin jumpers (x 8) which configure various board settings. And this
board has 8-pin jumper for setting backlight of the LCD panel. The jumper positions for each function are shown
below.
Table 3-3: 8-PinJumper Setting
Table 3-2: Configuration Jumper Settings
Jumper
Function
Position 1-2
Position 2-3
No Jumper
JP1
COREVDD
Normal
—
COREVDD current
measurement
JP2
PLLVDD
Normal
—
PLLVDD current
measurement
JP3
HIOVDD
Normal
—
HIOVDD current
measurement
JP4
HIOVDD Source
H1 connector, pin 32
3.3VDD
—
JP5
PIOVDD
Normal
—
PIOVDD current
measurement
JP6
PIOVDD Source
H4 connector, pin 2
3.3VDD
—
JP7
GIOVDD
Normal
—
GIOVDD current
measurement
JP8
GIOVDD Source
H4 connector, pin 6
3.3VDD
—
= Required settings when using S5U13U00P00C100 USB Adapter board
Jumper
Position
Function
JP9
Position 1-2
No Jumper
In connect case, TPS61161A is Enable
Position 3-4
No Jumper
In connect case, Vout = 20mA
Position 5-6
No Jumper
In connect case, Vout = 40mA (add connect Position 3-4)
Position 7-8
No Jumper
In connect case, Vout = 60mA (add connect Position3-4 and
Position5-6)
= suggested settings