Chapter 3 Installation and Configuration
S5U13L02P00C100 Evaluation Board User Manual (Rev. 1.0)
EPSON
9
JP1, JP2, JP3, JP5, JP7 - Power Supplies for the S1D13L02
JP1, JP2, JP3, JP5, and JP7 can be used to measure the current consumption of each S1D13L02 power supply.
When the jumper is at position 1-2, normal operation is selected.
When no jumper is installed, the current consumption for each power supply can be measured by connecting an
ammeter to pin 1 and 2 of the jumper.
The jumper associated with each power supply is as follows:
JP1 for COREVDD
JP2 for PLLVDD
JP3 for HIOVDD
JP5 for PIOVDD
JP7 for GIOVDD
Figure 3-2: Configuration Jumper Locations (JP1, JP2, JP3, JP5, JP7)