1. Overview
S5U1C17564T Manual
Seiko Epson Corporation
1
(Rev.1.0)
1. Overview
S5U1C17564T1 (SVT17564: Software eValuation Tool for S1C17564) and S5U1C17564T2 (SVTmini 17564:
Software eValuation Tool for S1C17564)
*1
are evaluation and development boards for S1C17564, a single chip
microcontroller from Seiko Epson.
S5U1C17564T1 is a combination of two boards, a CPU board and a peripheral board. The CPU board is
equipped with an IC socket for S1C17564, an extension connector, a debug connector for S1C17564, etc. The
peripheral board is equipped with an EPD (Electrophoretic Display), a connector for the EPD, jumpers, through
holes, tact switches, etc. By using those peripherals, you can display data on EPD, use switch inputs, etc.
S5U1C17564T2 comes with a CPU board used in S5U1C17564T1 only and can be used for many applications
using an extension connector.
1)CPU S1C17564
(QFP15-128)
2) Power supply voltage
External power supply (DC3.0V)
Coin battery (CR2032: 3.0V) CR2032 has been installed in the battery holder.
3) CPU clock generator
OSC1 : 32.768kHz Crystal oscillator
OSC3 : 12.000MHz Crystal oscillator
4) Onboard devices
CPU board:
Socket for S1C17564 (S1C17564 has been installed in the socket.)
Crystal oscillator
Reset switch
Extension connector
LED
Connector
Jumper switches for various settings
Peripheral board:
Connector for EPD
EPD panel (2”EPD panel from Chilin)
Tact switches
Jumper switches for various settings
5) Accessories
Jumper switches
¯
( )
Power cable
6) Operating ambient
temperature range
5
°
C to 35
°
C
7) Operating power
supply voltage range
2.8 V to 3.6 V
*1
S5U1C17564T1 is a package that comes with a peripheral board only.
S5U1C17564T2 is a package that comes with a CPU board only.
