7. Temperature/Humidity Measurement
(R/F Converter)
20
EPSON
S5U1C6F632T1/T2 (SVT6F632) Hardware Manual
7. Temperature/Humidity Measurement
(R/F Converter)
The S5U1C6F632T1 is equipped with a temperature sensor (thermistor resistor) and a humidity sensor. Using the S1C6F632’s
internal R/F converter, the S5U1C6F632T1 can measure temperature and humidity. The S5U1C6F632T2 lacks the resistor or
capacitor necessary for such measurements. For software evaluations, variable resistors and other functions are connected in pseudo
mode to the platform on the add-on board (S5U1C6F632P2), which is designed to be used in combination with the ICE63. For more
information, refer to Appendix A in the
S1C6F632 Technical Manual
.
Figure 7.1 Connection for temperature and humidity measurements
Caution!
The P00 to P02 ports on the S1C6F632 are shared with the R/F converter. These ports are used as R/F converter pins by the board
and serve as dedicated R/F converter connection pins. However, when the S5U1C6F632T2 is used, the temperature and humidity
sensors are connected to the add-on board inside the ICE63. This means the P00 to P02 ports can also be used as general-purpose
I/O ports by switching pin functions through software. The P00 to P02 pins can be used through the expansion board connector
(CN2). For more information, refer to “12. External Interface.”
Humidity sensor
Temperature sensor
