![background image](http://html.mh-extra.com/html/epson/sc-f2000-series/sc-f2000-series_user-manual_2419257011.webp)
Rear section
A
AC inlet
Connect the supplied power cable here.
B
Waste ink outlet (Left)
An outlet for the waste ink tube. Waste ink is ejected from here.
C
Tube clamp
A clamp that fixes the waste ink tube to the printer. Use the remaining clamps to secure the cables if necessary. See
the
Setup Guide
for details on attaching and removing the clamp.
D
Waste ink bottle holder
A holder to fix the waste ink bottle to the printer.
E
Waste ink bottle
A bottle for collecting waste ink. When the waste ink reaches the line on the bottle, replace it with a new waste ink
bottle.
F
Waste ink tube
Insert this into the waste ink outlet and the waste ink bottle. Make sure this is always attached to the printer and
inserted into the waste ink bottle when using the printer.
G
Waste ink outlet (Right)
An outlet for the waste ink tube. Waste ink is ejected from here.
H
LAN port
Connect the LAN cable here.
SC-F2000 Series User’s Guide
Introduction
11