![background image](http://html.mh-extra.com/html/epson/sc-f2000-series/sc-f2000-series_user-manual_2419257027.webp)
Disposal method
Pre-treatment liquid is classified as industrial waste.
Dispose of pre-treatment liquid according to your local
laws and statutes such as entrusting it to an industrial
waste disposal company. When handing over the
pre-treatment liquid to the industrial waste disposal
company, make sure you include the safety data sheet.
c
Important:
Do not put waste liquid in the waste ink bottle as it
will solidify if mixed with waste ink.
Attaching the tap
A
Cut the cardboard along the perforations, and
then remove the tap from inside.
B
Pull the cap section out of the hole in the
cardboard.
c
Important:
Make sure you pull the cap section out of the
hole in the cardboard. If the cap is opened
without being pulled out, the pre-treatment
liquid may spill out.
C
Remove the cap.
D
Remove the tap from the bag and check that the
hole is visible.
If you cannot see the hole, turn the tap's handle
section until the hole is visible.
Note:
If you cannot see the hole or if the tap is damaged,
contact the store where you purchased the product.
E
Attach the tap.
SC-F2000 Series User’s Guide
Basic Printing
27