![background image](http://html.mh-extra.com/html/epson/sc-f2000-series/sc-f2000-series_user-manual_2419257054.webp)
Disposal method
The wiper unit is classified as industrial waste.
Dispose of the wiper unit according to your local
laws and statutes such as entrusting it to an
industrial waste disposal company. When
handing over the pre-treatment liquid to the
industrial waste disposal company, make sure
you include the safety data sheet.
G
Insert the new wiper unit into the printer.
H
Press it down until you hear it click into place.
After installing the wiper unit, replace the
anti-drying cap.
I
Unpack the new anti-drying cap, and then
remove the cover.
J
Press the lever towards you, and then lift the
anti-drying cap to remove it.
K
Attach the cover to the old anti-drying cap, and
then put it into the bag of the new anti-drying
cap.
U
“Disposing of Used Consumables and
L
Press the lever forwards, and then place the holes
in the anti-drying cap over the two poles on the
printer.
M
Close the printer cover.
N
Press the
Z
button.
SC-F2000 Series User’s Guide
Maintenance
54