F
After the print head has moved to the
maintenance position, place a metal or plastic
tray, or paper under the print head.
This prevents ink from dripping and soiling the
printer.
G
While looking into the print head below the
control panel, clean around the nozzle surface.
c
Important:
Do not touch the nozzle surface or the parts
on the left-hand side of the nozzles shown
below with the cleaning stick. A malfunction
may occur.
(1) Wipe the edges at the front and rear of the
nozzle surface.
(2) Wipe the parts on the left and right of the
nozzle surface.
H
Once fibers have been wiped away, remove the
tray or paper that you placed on the movable
base.
I
Close the printer cover, and then press the
Z
button.
When the print head returns to its normal
position, the Settings menu closes. After you
finish cleaning, we recommend checking for
clogged nozzles.
U
“Checking for clogged nozzles” on page 44
SC-F2000 Series User’s Guide
Maintenance
64