SC-F2000
Revision C
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
136
Confidential
When connecting the TUBE ASSY to the BUFFR ASSY,
connect the TUBE ASSY so that the Red line on it comes to the
upper side.
When connecting the TUBE ASSY to the CIRCULATION
PUMP ASSY, connect the TUBE ASSY so that the Red line on
it comes to the lower side.
TUBE ASSY
Red line
BUFFR ASSY
TUBE ASSY
Red line
CIRCULATION PUMP ASSY
Before installing the joint, make sure the Joint Rubbers are
attached to it.
Before attaching the Joint Rubber, let it get wet with cleaning
liquid.
Always use new Joint Rubbers.
Insert only Joint Rubber per line between upper Joint and
lower Joint.
Confirm there are no foreign objects attached on the Joint
Rubbers.
Make sure to tighten the screw that secures the TUBE ASSY
using a torque driver with the following torque.
0.29 ± 0.05 N/m
Joint Rubber
Summary of Contents for SC-F2000 Series
