SC-F2000
Revision C
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
138
Confidential
3.4.5.9 CR UNIT
1.
Perform the Ink eject.
2.
Remove the PRINTER COVER.
3.
Remove the RIGHT HOUSING PLATE.
4.
Remove the RIGHT COVER ASSY.
5.
Remove the LEFT HOUSING PLATE.
6.
Remove the LEFT COVER ASSY.
7.
8.
Remove the CR SCALE.
9.
Remove the CR MOTOR ASSY.
11. Remove the DAMPER KIT.
12. Remove the PRINT HEAD.
13. Remove the three screws, and remove the APG Frame.
A) Silver M3x6 S-tite screw: 3 pcs
Figure 3-104. Removing the APG Frame
A D J U S T M E N T
R E Q U I R E D
When replacing/removing this part, refer to
Items and the Order by Repaired Part”
perform the specified operations including required adjustment.
Pay attention to the positioning points (See
A
APG Frame
A
A
Positioning point
Positioning point
Summary of Contents for SC-F2000 Series
