SC-F2000
Revision C
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
88
Confidential
3.4.3.15 RIGHT HOUSING CAP / RIGHT COVER ASSY
1.
Remove the PRINTER COVER.
2.
Remove the RIGHT HOUSING PLATE.
3.
Remove the screw, and remove the RIGHT HOUSING CAP.
A) Silver M3x8 Sems P-tite screw: 1 pcs
4.
Remove the nine screws, and remove the RIGHT COVER ASSY (
B) Silver M4x8 Cup P-tite screw: 3 pcs
C) Silver M3x8 Cup S-tite screw: 1 pcs
D) Silver M4x8 Cup S-tite screw: 4 pcs
E)
Silver M4x10 Sems S-tite screw: 1 pcs
Figure 3-31. Removing the RIGHT HOUSING CAP / RIGHT COVER ASSY
Pay attention to the positioning points (See
).
B
Positioning point
C
Positioning point
D
RIGHT HOUSING CAP
A
B
RIGHT COVER
ASSY
Summary of Contents for SC-F2000 Series
