SC-F2000
Revision C
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
98
Confidential
3.4.4.3 SUB-B BOARD
1.
Remove the PRINTER COVER.
2.
Remove the RIGHT HOUSING PLATE.
3.
Remove the RIGHT COVER ASSY.
4.
Remove the LEFT HOUSING PLATE.
5.
Remove the LEFT COVER ASSY.
6.
Remove the REAR COVER SUB ASSY.
7.
8.
Disconnect all cables and FFCs from the SUB-B BOARD.
9.
Remove the four screws, and remove the SUB-B BOARD.
A) Silver M3x8 Bind machine screw: 4 pcs
Figure 3-44. Removing the SUB-B BOARD
SUB-B BOARD
A
A
A
A
Summary of Contents for SC-F2000 Series
