C
Press the
Y
button on the control panel to
release the pressure roller.
The roll paper is automatically rewound if the
printer state is after the paper cut but in the
READY state. When
Remaining Setup
is set to
On
, the paper is rewound after printing the paper
information. The paper is not rewound when
using the optional auto take-up reel unit.
If the paper is not rewound automatically, you
need to rewind manually.
Note:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.
D
Lower the lock lever for the adapter holder to
release the lock.
E
Move the adapter holder to the left.
When moving the adapter holder, make sure you
use the handle.
F
Roll over the paper roll to the front side to place it
on the top of the printer.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Basic Operations
33
