Note:
For Enhanced Matte Paper, when the front basket
is level with the floor the basket can hold multiple,
continuous print outs. However, the image quality
may be smudged, damaged, or soiled.
For the SC-P9000 Series/SC-P8000 Series,
proceed to Step 5.
For the SC-P7000 Series/SC-P6000 Series, this
completes this section.
E
Switch the position of the basket at the rear
according to the length of the print outs.
When the paper length is 1,189 mm (A1 length)
or less
Raise the basket so that it is straight up.
When the paper length is 1,189 mm (A1 length)
or more
Lay the basket straight out.
Ejecting Paper to the Front
This section explains how to switch the paper basket
from the stored state to the ready state.
A
Raise the paper supports to the horizontal
position.
B
Remove the hook and loop fastener tape.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Basic Operations
41
