G
Insert the spindle with the roll paper facing the
direction shown in the illustration.
H
Attach the transparent media edge guide to the
spindle.
Attach them so that there are no gaps between
the roll paper and the media edge guides.
I
Place the spindle into the grooves with the
black media edge guide on the right.
J
Lower the spindle lock lever.
K
When printing a single sheet, pull out the paper
basket.
L
Make the paper settings.
U
“Setting Loaded Paper” on page 53
Removing Roll 1
This section describes how to remove the roll paper
from the printer after printing.
If the roll paper is not cut, select
Paper Setting
-
Roll
1
-
Feed/Cut Paper
and adjust the cutting position to
cut the roll paper.
A
If the paper basket is pulled out, remove the
printing paper and store the paper basket.
SC-P8500D Series/SC-T7700D Series User's Guide
Basic Operations
41
