SC-S30600 Series
Revision B
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
136
Confidential
3.4.5.10 CR HP Sensor
1.
2.
Remove the Media Loading Lever.
3.
Remove the Right Upper Cover.
4.
Move the CR Unit until to a position over the platen.
5.
Disengage the hooks, and remove the CR HP Sensor.
6.
Disconnect the cable from the CR HP Sensor.
Figure 3-85. Removing the CR HP Sensor
C A U T I O N
At the next step, be careful not to damage the hooks of the CR HP
Sensor as they are very thin.
- Rear side -
CR HP Sensor
Cable
Hooks
Summary of Contents for SC-S30600
