SC-S30600 Series
Revision B
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
137
Confidential
3.4.5.11 CR Encoder
1.
2.
Remove the Wiper Cleaner.
3.
Remove the Media Loading Lever.
4.
Remove the Right Upper Cover.
5.
Remove the Left Rear Cover.
6.
Remove the Left Upper Cover.
7.
Remove the Left Cover.
8.
Remove the Right Cover.
9.
Remove the APG Unit.
10. Remove the CR Motor.
11. Remove the CR Cover.
12. Remove the Damper Kit.
13. Remove the Print Head.
14. Remove the CR Scale.
15. Remove the CR Unit.
16. Remove the two screws, and remove the CR Encoder and Encoder Cover.
A) Silver M2.5x8 P-tite screw: 2 pcs
17. Disconnect the FFC from the CR Encoder.
Figure 3-86. Removing the CR Encoder
A D J U S T M E N T
R E Q U I R E D
When replacing/removing this part, refer to
Items and the Order by Repaired Part” (p200)
and make sure to
perform the specified operations including required adjustment.
When installing the CR Encoder, screw it together with the
Encoder Cover.
A
A
Encoder Cover
- Back Side of the CR Unit -
CR Encoder
FFC
Summary of Contents for SC-S30600
