SC-S30600 Series
Revision B
ADJUSTMENT
Ink Supply Related Checks and Adjustments
257
Confidential
4.12 Ink Supply Related Checks and Adjustments
4.12.1 Ink eject
EXECUTION MODE
Serviceman Mode
PROCEDURE
1.
Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing
[Menu] + [Back] + [OK]
.
2.
Remove all the ink cartridges and lower the cartridge locks.
3.
Start the Service Program and select
Ink eject
.
4.
Select nozzles from which ink is ejected, and click
[Run]
.
5.
When finished, click
[Finish]
and turn the printer OFF.
Figure 4-48. [Ink eject] Screen
C H E C K
P O I N T
Time required for ejecting ink: about 4 minutes
C A U T I O N
Running the Ink eject function one time is not enough to prevent
ink from leaking when removing the ink tubes. Prepare paper or
cloth to wipe off leaked ink in advance or run the Ink eject function
twice in a row.
Summary of Contents for SC-S30600
