GX8 Manipulator 2. Specifications
106
GX series Rev.2
2.2.2 Wall Mounting
Standard-model GX8-A***SW
Base
Arm #1
Arm #2
Shaft
Joint #2
(rotating)
Indicating lamp
Joint #1
(rotating)
Joint #4
(rotating)
Joint #3
(up and down)
+
−
+
−
+
−
+
−
Fitting (blue) for ø 4 mm
pneumatic tube
Fitting (white) for ø 4 mm
pneumatic tube
Fitting (white) for ø 6 mm
pneumatic tube
Fitting (blue) for ø 6 mm
pneumatic tube
User connector
(Ethernet connector)
Housing for M/C cable
User connector
(15-pin D-sub connector)
User connector
(9-pin D-sub connector)
Joint #3, #4
brake release switch
- The brake release switch affects both Joints #3 and #4. When the brake release switch is
pressed in emergency mode, the brakes for both Joints #3 and #4 are released
simultaneously.
- Make sure to turn OFF the Controller and inform others that you are working before the
maintenance work. Performing any replacement procedure with the power ON is
extremely hazardous and may result in electric shock and/or malfunction of the robot
system.
NOTE
Summary of Contents for SCARA GX Series
