Unpacking
Unpacking
Unpacking
Unpacking
1. Unpack the printer.
2. Attach the printer parts.
c
Caution:
If the printer comes on when you plug in the power cord,
turn off
the printer by
pressing down the
P
power button until the printer lights go out.
3. Connect the printer.
m
Setting up
Setting up
Setting up
Setting up
Installing the Printer Software
For Windows
1.
Make sure that the printer is off.
2. Insert the printer software CD in the CD-ROM
drive.
If the Installer dialog box does not appear, double-click
SETUP.EXE
in the CD-ROM.
3. Select
Install Software
, and then click
.
4. Follow the on-screen instructions. After installing
the printer software, the on-screen instructions
continue with the installation of the ink
cartridges.
For Macintosh (Stylus C41UX only)
c
Caution:
Turn off all virus protection programs before you install the printer software.
For users of Mac OS 9 or earlier
1. Insert the printer software CD in the CD-ROM drive.
2. Double-click the
EPSON
icon, select
Install Software
, and then click
.
3. Follow the on-screen instructions to install the printer software.
4. After installing the software, choose
Chooser
from the Apple menu, and then select
the icon for your printer and the port that your printer is connected to.
For Mac OS X users
1. Insert the printer software CD in the CD-ROM drive.
2. Double-click the Mac OS X folder, and then double-click the C41Series.pkg icon
inside it.
If the Authorization window opens, click the key icon, enter the administrator’s name and
password, click OK, and then click Continue.
3. Follow the on-screen instructions to install the printer software.
4. After installing the software, follow the instruction below to select your printer:
Double-click Macintosh HD.
→
Double-click the Application folder.
→
Double-click the Utilities
folder.
→
Double-click the Printer Center icon.
→
Click Add.
→
Select EPSON USB.
→
Select your
printer.
→
Click Add.
Installing the Ink Cartridges
1. Turn on the printer.
2. Remove the new ink cartridges from their protective bag.
3. Insert the ink cartridges.
Note:
Install all ink cartridges. The printer will not work unless all cartridges are installed
properly.
4. Press the
H
ink button.
The printer begins ink charging. It takes about
one and a half minutes
. While charging, the
printer produces a variety of mechanical
sounds. This is normal. When the green lamp
stops blinking, ink charging is complete.
c
Caution:
❏
Do not turn the power off during
the ink charging process.
❏
Do not load paper until ink charging is complete.
Note:
The ink cartridges packaged with your printer are partly used during initial setup.
In order to produce high quality printouts, the print head in your printer will be fully
charged with ink. This one-off process consumes a quantity of ink and subsequent
cartridge sets will last for their full rated life.
s
The contents may vary in certain locations.
Setup
Do not touch this part.
Do not remove or tear the label on the
cartridge.
Setup
c
Cautions
must be observed to
avoid damage to your
equipment.
Notes
contain important information
and useful tips on the operation of your
printer.
English
4022262-01
xxx
Cautions and Notes
