FCC Compliance Statement
41
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
Effective pixels
5100 × 7020 pixels at 600 dpi, 100%
Maximum
document size
8.5 × 11.7 inches (216 × 297 mm)
US letter or A4 size; the reading area can be specified from your software
Scanning
resolution
600 dpi (main scan)
1200 dpi with Micro Step Drive
™
(subscan)
Output resolution
75, 100, 150, 200, 300, 600, 1200, 2400, 4800, 9600, and 19200 dpi
Image data
16 bits per pixel per color internal
1 to 8 bits per pixel per color external
Interface
USB 2.0
Light source
RGB three color LED
Reliability
18000 cycles of carriage movement (main unit MCBF)
Standards and Approvals
Safety
UL 1950; EN 60950 (VDE); CSA C22.2 No. 950
EMI
FCC part 15 Subpart B class B; CSA C108.8 Class B
Summary of Contents for Stylus C87
Page 1: ...Epson Stylus C87 Quick Guide ...
Page 47: ......
Page 48: ......
Page 49: ...Limited Warranty 49 CPD 19996 Printed in XXXXXX XX XX XX XXX ...