background image

EPSON Stylus C80

6

 -

 EPSON Stylus C80

1/02

When you need new ink cartridges, contact your dealer or call 
the EPSON Store

 at (800) 873-7766. You can also visit the 

EPSON Store at www.epsonstore.com (U.S. sales only). In 
Canada, please call (800) 873-7766 for dealer referral.

Replacing an Empty Ink Cartridge

You can replace an ink cartridge when the 

 

H

 ink out light is 

either flashing or on. Be sure you have a new ink cartridge 
before you begin. Once you start the ink cartridge 
replacement procedure, you must complete all the steps in one 
session.

Follow these steps to replace ink cartridges when the 

 

H

 ink out 

light is flashing or on:

1. Make sure the printer is turned on and not printing. The 

 

P

power light should be on, but not flashing.

2. Lower the output tray and open the printer cover.

3. Press the 

 

H

 ink cartridge replacement button. The print 

head moves to the left, and the cartridge that needs to be 
replaced stops under the 

 

_

 mark. The 

 

P

 power light also 

begins to flash. 

Don’t press the 

 

H

 ink cartridge replacement button 

for more than three seconds, or the printer will 
start to clean the print head.

To avoid damaging the printer, never move the 
print head by hand.

4. Press the 

 

H

 ink cartridge replacement button again. 

If more than one ink cartridge is empty, the next 
cartridge moves under the 

 

_

 mark. This happens after 

you press the 

 

ink cartridge replacement button for 

every ink cartridge that needs to be replaced. 

If all the empty cartridges have been identified, the print 
head moves to the ink cartridge replacement position.

5. Pinch the front and back tabs of the empty cartridge as you 

lift it out of the printer. Don’t take the used cartridge apart 
or try to refill it.

If ink gets on your hands, wash them thoroughly 
with soap and water. If ink gets into your eyes, 
flush them immediately with water.

6. Before you remove the new cartridge from its package, 

shake it four or five times.

SM

Summary of Contents for Stylus Color C80












Reviews: