EPSON Stylus CX3100/3200
Revision A
Disassembly and Assembly
Scanner Unit Disassembly
40
4.3 Scanner Unit Disassembly
This section describes the disassembly procedure for the scanner unit. Figure 4-7
shows the disassembly procedure flowchart for the scanner unit.
Figure 4-7. Flowchart (2)
4.3.1 Hinge Removal
1.
Remove the scanner unit. (Refer to
“Scanner Unit Removal” on page 38
2.
Remove the document cover.
3.
Remove the four screws (CBP-Tite 3x10 F/Zn) securing the hinge to the scanner unit.
NOTE:
Screw tightening torque: 0.5-0.7 Nm
Figure 4-8. Screws securing the Hinge
4.
Remove the hinge.
C A U T I O N
Perform disassembly and assembly of the scanner unit in an
environment free from dust. You are advised to work in a clean
room or on a clean bench, if possible.
START
CBP-Tite 3x10 F/Zn
Summary of Contents for Stylus CX3100
