14
Copying
3. Close the scanner lid.
4. Press the
Copy
button to enter Copy Mode.
5. The default copy settings are displayed on the LCD screen. Change any
necessary copy settings, as described in “Changing Copy Settings” (below).
6. Press the
Color
button (to make color copies) or
B&W
button (to make
black-and-white copies). Your document is scanned and then printed. If you’re
using the
2-up
or
4-up
Copy Layout setting (see “Copy Layout” on page 17),
follow the instructions on the LCD screen to scan additional sheets.
Caution:
Never open the scanner section while scanning or copying, or you could damage the
CX6300.
Changing Copy Settings
The current copy settings are shown on the LCD screen. You can change the
settings as described below.
Note:
You can save the current copy settings (except for the number of copies) by pressing
the
Save
button for 3 seconds until you see the message “Stored” on the screen. To
recall these settings, press and hold the
Recall
button for 3 seconds.
To clear your settings and return the CX6300 to its default settings, press and hold the
Reset
button for 3 seconds.
Copy Mode button
Print quality
Paper size
Reduce/enlarge
Paper type
Menu selection buttons
Number of copies