20
Using Memory Cards
Inserting a Card
1. Make sure the CX6300 is turned on.
2. If you will be printing from or scanning to the card, make sure your CX6300
is not connected to your computer (or your computer is turned off ).
If you want to copy images between the card and your computer, leave the
computer connected. Any images stored on the card will be automatically
copied to your computer once you insert the card (see page 21).
3. Open the memory card cover.
4. Make sure the memory card light (next to the memory card slots) is off and
that no cards are in any of the slots. Then insert a card into the correct slot, as
shown on page 19.
Note:
Do not insert more than one card at a time, or you may not be able to tell which
card your images are being read from.
After the CX6300 reads the card, if it
finds any images saved in a compatible
format (see note below), you see the
following screen:
Found Images...
Total XXX
OK