Scanning to a Card
31
Scanning to a Card
Follow these steps to scan an image to a memory card and save it in JPEG format:
1. Make sure your CX6300 is not connected to your computer (or your
computer is turned off ), then insert a memory card (see page 20).
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the screen to format the card. Any data stored on the card
will be erased.
2. Press the
Scan
button to enter Scan Mode.
3. Press the green button next to the LCD screen until
To Photo Card
appears,
then press
OK
.
Note:
You can also scan to your computer or create an e-mail with the scanned image
attached. Select either
To PC
or
To E-mail
, then see your online
Reference Guide
for details.
4. Select the document type (
Text
or
Graphic
).
5. Select
Auto
as the scan area. (If the edges
of your document are light in color, the
CX6300 may not be able to detect them
and part of your image may be cut off; in
that case, select
Max.
to scan the entire
area.)
6. For ordinary documents, select
Normal
as the quality of the scanned image. For
higher quality, select either
Fine
(for text) or
Graphic
(for photos).
Note:
Higher-quality images take up more memory card space.
7. Press the button next to
OK
(shown on the LCD screen).
8. Make sure your original document is placed on the scanner, then press the
Color
button to start scanning. Your image is saved to the “epscan” folder on
the memory card.
Document type
Scan area
Image quality
