Troubleshooting / Scanning Problems
Quality Problems
Edges of the document are not scanned
You cannot scan an image or you only get a few dots for the scanned image
The image does not look the same as the original
A line of dots is always missing from the scanned image
A line of dots always appears in the scanned image
Straight lines in the image come out jagged
Scanned image by using the buttons on the control panel is missing
The entire image is distorted or blurred
Part of the image is distorted or blurred
Colors are patchy or distorted at the edges of the image
The image is faint or out of focus
Image is dark, with little or no detail
Moiré (cross-hatch) patterns appear in the scanned image
Poor character recognition during OCR scanning
The printed image is larger or smaller than the original
Scanned images cannot be printed or come out garbled when printed
Images cannot be located properly in the Thumbnail preview
Edges of the document are not scanned
Try one or more of these solutions:
●
Make sure the document is aligned with the alignment mark. See
●
Position the document so the area you want to scan is within the edge guide limits of the
document table. The area with a width of maximum 2.5 mm from both the horizontal and vertical
guides is not scanned.
Summary of Contents for Stylus CX6500
