14
Printing From a Memory Card or Digital Camera
Inserting the Card
1. Make sure the NX200 Series is turned on.
2. Insert your card into the correct slot as shown (it won’t go in all the way).
Insert just one card at a time.
The memory card access light flashes and stays lit. Now you can:
■
Print an index sheet so you can select which photos to print (see page 15)
■
Print photos pre-selected on your camera using DPOF (see page 17)
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the NX200 Series while the memory card access
light is flashing; you may lose data on the card.
Memory card
access light
Left slot
Right slot
Summary of Contents for Stylus NX200
Page 48: ...CPD 25336R1 ...