background image

Checking the print head nozzles

Once paper is loaded, follow these steps to check the print head nozzles.

For Windows users

1.

Click the 

Start

 button, point to 

Settings

, and click 

Printers

.

2.

Select the icon for your printer, then 
click 

Properties

 on the File menu. 

Then click the 

Utility

 tab.

3.

Click the 

Nozzle Check

 button, and 

follow the on-screen instructions.

4.

If the nozzle check page does not 
print satisfactorily (for example, if 
any segment of the printed lines is 
missing), then you should clean the 
print head. Follow the on-screen 
instructions on the Nozzle Check 
utility. If the printout is satisfactory, 
your printer is now set up and ready 
to use.

5.

Click 

OK

 to close the Properties 

dialog box.

For Macintosh users

1.

Select 

Page Setup

 in the Finder’s 

File

 menu. 

2.

Click the 

 utility icon.

3.

Click the 

Nozzle Check

 button, 

and follow the on-screen 
instructions.

4.

If the nozzle check page does not 
print satisfactorily (for example, 
if any segment of the printed line 
is missing), then you should clean 
the print head. Follow the on-
screen instructions on the Nozzle 
Check utility. If the print out is 
satisfactory, your printer is now set up and ready to use.

5.

Click 

OK

 to close the utility dialog box. Then click 

OK

 to close the Page 

Setup dialog box.

Downloaded from: 

http://www.usersmanualguide.com/

Summary of Contents for Stylus PHOTO 1290


















Reviews: