EPSON Stylus Pro 10000/10000CF
Revision A
Disassembly & assembly
Disassembly Flow
133
4.2.2 Circuit Board Removal
This section explains how to remove the Power Board, the HJFK / Dummy Board, the
C362MAIN Board, the CSIC Board, the C362DRV Board and the P/S Fan.
4.2.2.1 Power Board Removal
1.
Remove the Rear Cover as described in “Rear Cover Removal” paragraph 4.2.1.7.
2.
Remove the three cables connected to the Power Board as shown below.
Figure 4-41.
W A R N I N G
Unplug the AC power cable and wait at least five minutes before
removing the power board to make sure there is no residual power
left in the board’s condensers.
Table 4-2. Power Board Connectors
Connector #
Pins
Color
Connection
Notes
CN2
3
BIK/R/ORG
C362DRV Board CN56
CN3
None
CN4
12
YEI/BRN/RED/
BIU/ORG/BIK
C362DRV Board CN40
CN2
CN4
Summary of Contents for Stylus Pro 10000 Series
