EPSON Stylus Pro 10000/10000CF
Revision A
Maintenance
General Maintenance Issues
279
Figure 6-1.
6.1.3 Printing output at the time of maintenance
Printing of the nozzle checking pattern / status sheet
Do the panel switch operation shown below, after confirm that the LCD display of the
operation panel is displayed "READY".
Figure 6-2.
Wait until the power supply lamp turns off,then extract the AC power cable from the plug
socket.
Cleaning unit
Waste ink unit (pads)
Flushing box
Dot missing detector
LCD Display
Operation Panel Switch
Confirm whether abnormal sound etc.
does not occur during the actuation.
*1
*2
READY
PRINTER SETTING MENU
TEST PRINT MENU
NOZZLE CHECK PATTERN=PRINT
Print the nozzle check pattern.
STATUS SHEET
Print the status sheet.
SelecType
SelecType
Item
Item
Item
Power
Enter
Summary of Contents for Stylus Pro 10000 Series
