Printing with Windows
40
EPSON Stylus Pro 3800
User’s Guide
4. Specify the width of the binding margin, using the Binding Margin text box. You can
specify any width from 3 to 30 mm.
Note:
The actual binding margin may vary depending on the settings specified in your application. We
recommend that you test the print quality before printing the entire job.
5. Click
OK
to return to the Layout menu, and then click
OK
to save your settings.
6. Make sure paper is loaded, and then send a print job from your application. Instructions
for generating the even-numbered pages will be displayed while the odd-numbered
pages are output.
7. Follow the on-screen instructions and reload the paper.
Note:
❏
The paper may curl during printing due to the amount of ink used. If this problem occurs,
slightly curl the sheets in the opposite direction prior to reloading them into the printer.
❏
Align the sheet stack by tapping its edges against a hard, flat surface prior to reloading the
stack into the printer.
❏
Follow the instructions provided when reloading the printouts. Paper jams or improperly
placed binding margins may occur if the printouts are not reloaded correctly.
❏
In the event of a paper jam, see “Clearing paper jams” on page 161.
8. Once the paper is reloaded, click
Resume
to print the even-numbered pages.
Folded Booklet double-sided printing
You can also make single-fold booklets using the double-sided printing feature. When you
create a single-fold booklet, the pages that appear on the outside (after the booklet is
folded) are printed first. The pages that will appear inside the booklet can then be printed
after the paper is reloaded into the printer.
✽
Binding Edge
1
2
4
6
8
3
5
7
9
10
11
12
