Printing with Windows
35
EPSON Stylus Pro 3800
User’s Guide
4. Click
OK
.
5. Start printing your data from your application.
Making the Paper Size setting
You can select a paper size that you want to use. Select the proper paper size from the
Paper Size list.
You can also add a custom paper size, using the steps below.
1. Select
User Defined
from the Paper Size list. The User Defined Paper Size dialog box
appears.
2. Enter
Paper Size Name
,
Paper Width
and
Paper Height
, and then select
Unit
.
3. Click
OK
to save the custom paper size.
Retain Size
Select this setting if you do not want to change the ratio of your print
data.
When you select this setting, you need to enlarge your image data to
exceed the paper width and height, to avoid unprinted areas
appearing along the all four edges. Enlarging 5 mm in all four
directions is recommended, using the application that created the
data.
Amount of
Enlargement
When you select Auto Expand, the slider becomes available. Using
the slider, you can control the amount of the image that extends
beyond the edges of the paper during borderless printing.
For most print jobs, Max is recommended in order to eliminate margins
on all sides of the paper.
Moving the slider towards Min decreases the amount of the image
enlargement; however, as this amount decreases, margins may
appear on one or more sides of the paper.
