EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Disassembly & Assembly
Disassembly Procedures
245
4.
Peel off the acetate tape attached to the gap between the "Frame, Fan,
Unit" and the main unit.
5.
Remove the two screws securing "Frame, Fan, Unit" and remove "Frame,
Fan, Unit" by pulling it toward you.
C.B.S. 3x6:
2 pcs.
Figure 4-53. Frame, Fan, Unit Removal
Align the two main frame dowels with the two positioning
holes on the "Frame, Fan, Unit".
C.B.S. 3X6
C.B.S. 3X6
Frame, Fan, Unit
Acetate Tape
Dowel and Positioning Hole
Dowel and Positioning Hole
Dowel and Positioning Hole
Summary of Contents for Stylus Pro 4800 Portrait Edition
