EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Product Description
Operating Panel
31
1.4.1.2 Switch
Table 1-23. Panel Functions and Switch Operation
Switch
Function
Function
(In panel setting)
Function
(+ Power ON)
Single
3 sec. push
Power
Power ON/OFF
*1
—
—
—
Pause
Pause / Switch Print
Paper feed operation by backside manual
insertion within 3 sec.
Reset
Appear from panel
setting
Maintenance mode1
Menu / Cleaning [>/
↵
]
Printing
Printer status menu shift
Except above
*3
Panel setting mode shift/decision
Paper thickness detection less than 0.8mm
All heads cleaning
*2
Paper thickness detection over 0.8mm
All heads cleaning after removing paper
Paper thickness detection over 0.8mm when
printing
Not in operation.
Item shift (down)
Operation
execution
Setting fixed
Memory
Select paper type / Paper Cut [<]
Paper type select
*4
Not in operation when printing
Not in operation when the paper is picked
up by ASF.
1. Roll paper cut ON
2. Roll paper cut OFF
3. Cut sheet
Indicate 1, 2, 3, 1, … by turns.
Paper cut or paper feed
*5
Not in operation when printing
Roll paper cut ON
Move to cut operation after 3 sec.
Roll paper cut OFF
Not operated.
Cut sheet is not operated.
Item shift (up)
Paper Feed / Eject Paper [
∧
]
Paper feed for roll paper (reverse)
*6
If cut sheet is not set, paper is fed by ASF.
High speed paper feed (reverse)
Roll paper only. (Not in operation for cut
sheet.)
Increase setup value,
switch over setting
Paper Feed / Eject Paper [
∨
]
Paper feed for roll paper (forward)
*7
If cut sheet is set, eject sheet
If cut sheet is not set, paper is fed by ASF.
High speed paper feed (forward)
Roll paper only. (Not in operation for cut
sheet.)
Decrease setup
value, switch over
setting
Continued on next page
Summary of Contents for Stylus Pro 4800 Portrait Edition
