EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Disassembly & Assembly
Disassembly Procedures
340
5.
Loosen the "Coupling Screw, M7"s that secure the "Tube, Supply, Ink"s to
the "Head Unit" to draw out the "Coupling Screw, M7"s.
6.
Remove the "O-ring, Coupling M7"s and "Coupling Screw, M7"s from the
"Tube, Supply, Ink"s.
(Refer to "4.2.8.2 Valve Assy., Head" (p291).)
7.
Remove the five "Holder, FFC"s ("Holder, FFC; B").
8.
9.
Remove the "Ink Tube Unit" from the "Carriage Unit".
(Refer to "4.2.7.1 Carriage Unit" (p266).)
10. Remove the screw that secures both the "Holder, Tube, A" and "Holder,
Tube, B", and separate the "Holder, Tube, A" from the "Holder, Tube, B".
C.B.P. 3x8:
1 pc.
Figure 4-192. Coupling Screw, M7 Removal
Figure 4-193. Holder, Tube, A and Holder, Tube, B Separation
Hitch the two tabs on the "Holder, Tube, B" to the "Holder,
Tube, A" before tightening the screw.
Holder, Tube, A
Holder, Tube, B
Tabs
LK
LM
LC
LLK
Coupling Screws, M7
C.B.P. 3x8
Holder, Tube, B
Holder, Tube, A
Summary of Contents for Stylus Pro 4800 Portrait Edition
