EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Adjustment
Basic Adjustment
429
Writing Color ID (at repair work site)
1.
Start the adjustment program and select [Colorimetric Calibration ID].
2.
Click [Run] to start “Colorimetric Calibration Tool”.
3.
Click [Write Color ID].
4.
"Adjustment Procedure (Entire Process Workflow)"
to check the connection status to the printer.
5.
Select [File] from “Input Method”.
6.
Click [Specify the file], select the color ID data file (dat format), and click
[Next].
7.
Make sure that the S/N shown in the input data is the same as that of the
connected printer and that it should be the same as the product number of
the printer. Click [Next].
8.
When the writing is complete, click [End]
Figure 5-81. Writing Colorimetric Calibration ID
Summary of Contents for Stylus Pro 4800 Portrait Edition
