EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Adjustment
Advanced Adjustment
434
5.4.3 Destination Setting
Procedure
1.
Turn the printer on.
2.
Start the adjustment program and select [Change Model Name].
3.
Select the "Others" and click the [Run] button to set the destination to
the NVRAM.
4.
Click the [Next] button.
5.
Click the [Check] button and current setting model name will be
displayed. Click the [OK] button after confirming the set model name.
6.
Click the [Finish] button.
Figure 5-88. Destination Setting Screen (1)
Figure 5-89. Destination Setting
Figure 5-90. Confirming Model Name
Summary of Contents for Stylus Pro 4800 Portrait Edition
