EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Product Description
Operating Panel
97
Electric
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Counter display
The counters shown in the table below are displayed. The number is
displayed in hexadecimal.
Note *:
The items except the following are set to 0 when performing counter
initialization.
Note *1: When replacing the old maintenance tank with a new one, the old value is
changed to the new one.
*2: The counter is reset when the cutter replacement sequence is performed
successfully.
*3: Counts 1 when any print start request is received.
Occurred error display
Displays error codes of fatal errors. The latest error is 0 and 7 errors are
recoreded in 0 to 6.
CSIC
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Actuator
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Actuator2
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Table 1-41. Counter Display Items and Units
Maintenance
Unit
Waste ink
*1
0.02g
Wiper
Number of times
Rubing
Number of times
Paper lever UP
Number of times
Front cover open
Number of times
Ink lever UP
Number of times
CR Motor reciprocating
Number of times
PF Motor travel distance
3079.413957mm unit
Printouts (cut sheet/ roll paper)
Number of print
*3
Head cleaning
Number of times
A to H row ink eject
Mega dot
Cut
*2
Number of times
Cutter solenoid operation
Number of times
Summary of Contents for Stylus Pro 4800 Portrait Edition
