EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Adjustment
Check Results
436
5.5 Check Results
5.5.1 Check Nozzle
This checks whether or not each of the head nozzles is jetting ink normally. If
nozzle ink jetting is abnormal, execute cleaning and check the nozzles again.
Paper Used
Size: 17"
Type: Enhanced Matte Roll Paper
Procedure
1.
Turn the printer on.
2.
Start the adjustment program and select [Check Nozzle].
3.
Click the [Run] button and print the nozzle check pattern.
4.
Check that there is no dot missing on the pattern.
5.
If there is no dot missing, click the [Finish] button to finish the check
nozzle.
If there is dot missing, execute cleaning and then print the check
pattern and check it again.
Figure 5-92. Check Nozzle Screen
Figure 5-93. Nozzle Check Pattern
Summary of Contents for Stylus Pro 4800 Portrait Edition
