Paper Handling
247
6
6
6
6
6
6
6
6
6
6
6
6
Eng
li
s
h
3. Place the roll paper on a flat surface so that it does not unwind.
Slide the roll paper onto the spindle and onto the white flange
until it fixes into place.
Note:
Do not stand the spindle when attaching the roll paper. It may cause
slant paper feeding.
4. Slide the black movable flange (removed in step 1) onto the
spindle and into the end of the roll paper until it fixes into
place.
Removing the roll paper from the spindle
To remove the roll paper from the spindle, follow the steps below.
1. Place the paper loaded spindle down on a flat surface.
2. Slide the black movable flange off the end of the spindle by
tapping the same end of the spindle with your hand to loosen
it. The flange is removed.
