Paper Handling
255
6
6
6
6
6
6
6
6
6
6
6
6
Eng
li
s
h
To use the roll paper belt, tap the end of the roll paper belt lightly
on the roll paper. The belt will wrap itself around the roll paper.
To remove the roll paper belt, simply unwrap it from the paper.
When not using the roll paper belt, keep it wound around the end
of the spindle.
Cutting the roll paper or printing page lines
When your print job is finished, the printer cuts the roll paper
automatically or prints page lines around the printed data
according to your settings. You can make these settings using the
control panel or printer software.
Note:
❏
Printer driver settings usually override the control panel settings.
Use your printer driver settings whenever possible.
❏
When the printer cuts the printout, it may take a little time to
proceed with cutting after printing is finished.
Cutting the roll paper automatically
To cut the roll paper automatically after printing, follow the steps
below.
1. Before printing, press the
Paper Source
l
button to select
Roll Auto Cut On
.
