264
Paper Handling
8. Move and hold the
Manual
switch on the Auto Take-up Reel
Unit to the Forward position, and take up at least one turn of
paper on the take-up reel core. Make sure that adequate slack
remains between the roll paper and the take-up reel core.
Winding paper backward
When you want the paper wound onto the take-up reel core with
the print on the inside, set the take-up reel unit to wind paper
backward. Follow the steps below.
1. Remove the paper guides from the printer.
2. Make sure that the roll paper is loaded in the printer properly.
For instructions, see “Loading roll paper” on page 250.
3. Press the
Paper Source
l
button to select
Roll Auto Cut Off
.
