114
114
|
Printer Parts and Controls Summary
Menu Setting Summary
Press the
Menu
button to enter menu mode and select the settings
summarized here.
Menu setting
Description
PRINTER SETUP menu
SIDE MARGIN
Selects the margins for the left and right sides.
0.20inch
to
1.00inch (5mm
to
25mm
)
PAPER SIZE CHECK
Selects whether the printer checks to see if the
width and top edge of the loaded media matches
data for your print job (
ON
is recommended to
avoid ink overspray).
PAPER SKEW CHECK
Selects whether the printer alerts you if media is
not feeding straight by displaying
PAPER SKEW
on the LCD display and stopping printing. If you
select
OFF
, you do not receive an error even if the
print job is out of range of the loaded media.
PRINT NOZZLE PATTERN
Selects whether to automatically print the nozzle
check pattern before printing each print job or
before every tenth sheet.
OFF
ON: EVERY PAGE
ON: EVERY 10 PAGES
HEATING TIME
Selects the length of time to preheat the heaters.
(The heaters turn off after this time has passed
after turning on the printer or finishing a print job.)
OFF
10min
to
240min
FLUSH ONTO PAPER
Selects where to perform the flushing operation
during printing.
YES
to flush at the page margins (speeds up
printing by avoiding print head returns to the
flushing box; set frequency below)
NO
to flush only at the flushing box
FLUSHING FREQUENCY
Selects how often to perform the flushing
operation at the flushing box (if YES selected
above).
5PASS
for every five passes of the print head
1PASS
to
999PASS
Summary of Contents for Stylus Pro GS6000
