Note:
See “Error Lights” in Chapter 3 for more information on
troubleshooting.
Buttons
Operate
Turns the printer on and off.
c
Caution:
Always turn off the printer by pressing the
Operate
button. Then wait until the
Operate
light stops flashing
before unplugging the printer.
Never turn off the printer while the
Pause
light is flashing.
Font
Controls the fonts available on the printer. Normally
you should use your software to select fonts. See
Appendix B for samples of the seven built-in fonts.
Load/Eject
(or
Black)
Loads or ejects a sheet of paper. The printer normally
loads and ejects paper automatically. When pressed
with
Alt
, cleans the black print head.
Pause
(or
Reset
)
Stops printing temporarily. Press it again to resume
printing. When pressed with
Alt
, clears the printer’s
buffer and resets the printer settings to their factory
defaults.
Economy/Condensed
(or
Color
)
Selects economy or condensed mode. In economy
mode, the printer uses less ink to produce text and
images. Condensed printing reduces the size of
characters to approximately 60% of their normal
width. It is best to use your software to select
character size, however. When pressed with
Alt
,
cleans the color print head.
L
Verde+ Reference Guide
A5 size
Chapter 2
10-25-95
DR, pass 2-Rev1
2-4
Controlling the Printer
