EPSON Stylus Pro 7000
Revision A
Disassembly & Assembly
Disassembly Flow
117
4.
Remove three white screws (CBS:M4x8) securing the lower section of the
cover, and remove three white screws (CBS:M4x8) securing the upper
section of the cover.
5.
Remove the Rear Cover by pulling to the rear (lift and pull if necessary).
4.2.1.7 Paper Guide L2 Removal
1.
From the front, remove four white screws (Truss:M4x6), and remove the
Paper Guide L2.
Figure 4-17. Paper Guide L2 removal on right side
Figure 4-18. Paper Guide L2 removal on left side
Two
screws
Paper
Guide
L2
Paper
Guide
L2
Two
screws
Summary of Contents for StylusPRO 7000
