EPSON Stylus Pro 7000
Revision A
Operating Principles
Description of Components
69
"
Cover open sensor
To ensure proper paper feeding and to prevent paper jams, the front cover
must be closed during printing. There is one cover-open sensor that detects
when the cover is open using an interlock switch, and this sensor is located
near the left side of the main printer opening. When the cover is open, the
relay that controls the current to the CR motor and PF motor cuts off the flow
of that current. When this happens, the motors lose their electromagnetized
state.
Figure 2-15. Cover Open Sensor
The sudden loss of current to the motors can cause problems and may even
damage the motors or the printhead. To prevent this, a discharge from the
capacitor connected to the current circuit is used to slow down the current
before it is totally cut off. This process ensures that printing stops when the
cover is open without causing any damage to printer parts.
Figure 2-16. Cover-Open-Motor Control Circuit
Cover
Cover open sensor
Cover open
sensor flag
Ink cartridge
holder
Control
panel
Cover open
flag
Driver
Driver
CR
Motor
PF
Motor
Front cover
open
C126/127
Summary of Contents for StylusPRO 7000
