TM-J9000/J9100 User’s Manual
11
English
Follow these steps to install an ink cartridge for the first time or to replace
a used ink cartridge.
1.
Make sure the printer power is on. If it is not on, plug in the power
supply cable and press the power switch on the front bottom-right of
the printer.
2.
Make sure the
INK
LED is lit or flashing. When using both the black
ink and colored ink, check which of the ink cartridge
INK
LEDs is lit or
flashing.
3.
Hold the tab and open the ink cartridge cover.
4.
Hold the knob at the top of the used ink cartridge and lift the
cartridge out of the printer.
5.
Take a new ink cartridge out of its packaging, and remove the yellow
tape.
CAUTION:
Do not remove any tape on which the EPSON logo is printed.
(TM-J9100)
Summary of Contents for TM-J9000 Series
Page 1: ...User s Manual 405074707 ...
Page 32: ...Printed in China ...